A face recognition attendance terminal feels almost effortless: the employee walks up, looks at the screen and is marked present within a moment. Behind that moment is a chain of steps, from capturing a clear image to comparing it with stored data and passing the result to your attendance software. Understanding the chain helps you install the device properly, enrol people correctly and explain the system calmly to staff who have questions about it.
The big picture
Every face recognition system, whatever the brand or model, performs the same basic sequence: capture an image, find the face in it, convert the face into a numerical description, compare that description with the stored ones, decide whether it is a match, and record the result. The first time a person is registered is called enrolment, and every later punch is called verification or identification.
It helps to remember that the terminal is only one part of the system: the camera, the matching software inside the device, the network link and the attendance software each contribute to the final result. When something goes wrong, tracing it to the right part saves a lot of time.
You can see the range of devices in our face recognition attendance machines and the faster speed face terminals, but the principles below apply to both.
Enrolment, templates and matching
Step 1: Enrolment
Enrolment is the foundation of everything else. During enrolment, the device camera captures the person's face, often several times, from slightly different angles or expressions. The person is linked to an employee code, name and department in the system.
Good enrolment practice makes a visible difference to day-to-day accuracy:
- Enrol in the same lighting conditions in which the person will punch, or as close to them as possible.
- Ask the person to look straight at the camera, with a natural expression, at a normal distance.
- Remove or adjust anything that changes the face significantly, such as a cap pulled low or a heavy scarf, unless the person always wears it.
- If the device allows it, capture a second set with spectacles on and off.
- Check that the first test punch works before the person leaves.
Some systems also allow a photo to be uploaded from software, which saves time for a large workforce, but a photo that is not clear and front-facing will give weaker results than a live capture.
Step 2: From face to template
The device does not store a picture and then compare pictures pixel by pixel. Instead, software first detects the face within the camera image and locates reference points such as the eyes, nose and mouth. It then converts the geometry and texture of the face into a compact set of numbers, usually called a template or feature vector.
This template is what the machine uses for comparison. Depending on the product, the original image may or may not be kept as well. It is worth asking the supplier exactly what is stored, where it is stored and whether the template can be exported, because that affects your data protection approach.
Step 3: Matching
When someone stands in front of the terminal, the device repeats the capture and template process in real time and compares the new template with those stored. The result is a similarity score. If the score passes a configured threshold, the device accepts the person and records the punch.
The threshold is a balance. Set too strict, the machine rejects genuine employees more often. Set too loose, the risk of accepting the wrong person rises. Most installers leave the default for ordinary offices and adjust only when there is a clear reason, such as very similar-looking users in a high-security area.
There are two modes. In one-to-many identification the person simply looks at the camera and the device searches its whole database. In one-to-one verification the person first enters a code or swipes a card, and the device compares the face with only that person's template. Verification is faster to compute and can be used as a second factor in sensitive areas.
Liveness detection and anti-spoofing
A reasonable worry is whether someone can hold up a photograph or a phone screen to punch for a colleague. Good devices include liveness detection, which tries to tell a real, present person from a copy. Methods differ by product, but in general they include:
- Using an infrared or depth-sensing camera that responds differently to a real face than to a flat image.
- Analysing texture and reflections that printed photographs and screens do not reproduce well.
- Looking for natural signs of a live person.
No system is perfect, and the level of protection differs from model to model, so ask the supplier how liveness is handled on the specific device and test it on site. For high-security entrances, combine face recognition with a second factor such as a card or PIN.
Cameras, lighting and real-world conditions
Visible-light versus infrared cameras
Many terminals use visible-light cameras, similar to those in a mobile phone. They work well in good, even lighting and are generally the more economical design. Their weakness is changing light: strong sunlight behind the user, deep shadows or very low light can reduce accuracy.
Terminals with infrared illumination, sometimes combined with a visible-light camera, see the face in a way that is less affected by ambient light and usually offer stronger liveness checks. They suit entrances with mixed lighting, night-time use or higher security needs. The trade-off is usually a higher cost.
Lighting and placement
Most complaints about face attendance are really complaints about placement. These simple rules solve the majority:
- Avoid backlight. Do not install the terminal facing a window or bright doorway, because the person's face becomes dark against a bright background.
- Keep light even. Light falling across one half of the face from a side window can cause failures.
- Mount at face height. Ensure the camera sees the face straight on. A device mounted too high sees a tilted face, and one too low sees mostly the chin.
- Allow a clear standing zone. People should be able to stop at the right distance without being jostled.
- Shield from direct sun. A small canopy or a change of wall can help.
At busy gates, a speed face terminal that recognises people on the move shortens the queue, but placement rules remain the same.
Masks, spectacles and changes in appearance
Faces change: people grow beards, change hairstyles, wear spectacles or tinted lenses, and sometimes wear masks. Modern algorithms tolerate many of these changes, but they cannot do everything.
- Spectacles: usually fine, though thick frames or strong reflections can interfere. Enrolling with and without spectacles helps.
- Beards and hairstyles: small changes are handled well. If the change is dramatic, re-enrol the person.
- Masks: some terminals are designed to recognise partly covered faces, others are not. If your staff wear masks for work, make that a selection criterion and test it.
- Ageing: over months and years, faces change slowly, so a periodic re-enrolment is sensible.
Where temperature screening is required, there are devices that combine face recognition with a body temperature sensor. See the thermal-based readers for that class of device.
From punch to payroll
Recognising a face is only the first half of the job. Each accepted punch is stored as a record containing the employee code, date, time and often the device and the punch type. The records travel from the terminal to software in one of several ways: a cable on the network, Wi-Fi, a USB drive, or an internet connection to a cloud service.
The software then applies your rules. It works out the first in and last out, assigns the punch to a shift, calculates late arrivals, early exits and overtime, applies leave and holidays, and produces the muster. From there, the attendance days feed into salary calculation. Our attendance and payroll software page describes this stage. For a broader view of choosing hardware, read how to choose a biometric attendance machine.
Privacy and data protection good practice
Because attendance data ties a name to a face and a daily routine, it needs more care than a simple register. A short written policy, agreed with management and shared with staff, avoids most misunderstandings later.
A face is personal data, so it deserves careful handling. The following points are general good practice, not legal advice, and you should confirm your obligations with your own advisers.
- Tell employees. Explain what is collected, why, how long it is kept and who can see it, preferably in writing before enrolment.
- Collect only what is needed. Use the data for attendance and access, and avoid unrelated uses.
- Restrict access. Only authorised administrators should see or export employee data, and each should have a separate login.
- Protect the system. Change default passwords, keep device software updated and keep the devices on a secured network.
- Remove leavers. Delete the templates of people who have left once the retention period you decided on has passed.
- Back up carefully. Store backups securely, because they contain the same personal data as the live system.
Get expert advice
If you are comparing face recognition devices, NUMAX Technology Pvt. Ltd. offers free pre-sales guidance and can test options at your entrance. We install in Delhi, Noida, Gurugram, Faridabad and Ghaziabad, and supply across India. Call +91 93193 86278 or +91 84481 06278, or send your requirement through the contact page.